ProAct Treatment Equipment
Specification Sheet
Soil Vapor Extraction System
ProAct SVE 250/AS 100
Featuring the "ProAct Advantage"
|
General Specification: |
Positive displacement SVE Blower |
|
|
Rotary vane AS blower |
|
|
250 SCFM @12” Hg SVE |
| 100 SCFM @15 PSI Air sparge | |
| 5 GPM water treatment | |
|
Trailer Size: |
8 ft wide x 20 ft long x 8 ft height |
|
|
4,100 pounds double axle trailer |
|
Main Equipment: |
15 Hp motor with Roots 45 blower |
| 15 Hp motor with Gast 1290 blower | |
|
|
200 gallon knock out tank w/clean out port |
|
|
5 GPM XP ¾ Hp pump |
|
|
Erco flow meter(air) |
| Totalizing water flow meter | |
|
|
Vacuum and pressure gauges, sample ports |
|
Trailer Specifications |
XP Lights, Heater, fan in equipment room |
| Components in equipment room wired for XP conditions | |
| Outside light and control panel | |
|
Control Panel Specifications: |
HAO Switch all components |
|
|
Emergency stop button |
|
|
Fault lights and reset |
|
|
GFI |
|
Inlet hose connections: |
6-2" well manifold including site glass, flow meter, vacuum gauge, flow control valve. |
|
|
6-1” well connection for SVE for high flow rates |
|
Outlet hose connections: |
4" air stack for blower exhaust (18 ft ht.) |
| Vapors can be plumed for off-gas treatment | |
|
|
1” male camlock water discharge |
|
Power requirement: |
230 volt, 3 phase, 100 amp service (Main fused disconnect located outside trailer) |
Contact ProAct at 231-843-2711 Fax 231-843-4081 or ProActAdvantage@proact-usa.com