ProAct Treatment Equipment Specification Sheet      

Dual Phase Extraction System                    

ProAct DPES 500                              

Featuring the "ProAct Advantage"                   

General Specification: Liquid Ring Pump

 

500 ACFM @28” Hg

 

10 GPM water treatment

Trailer Size:

8 ft wide x 20ft long x 7ft height

 

5,000 pounds double axle trailer

Main Equipment:

40 Hp Oil sealed Liquid Ring Pump 

 

240 gallon knock out tank w/clean out port 

  10 GPM XP 1 Hp Moyno pump

 

ERCO flow meter (air)

 

Totalizing water flow meter

 

Vacuum and pressure gauges, sample ports

 Trailer Specifications

XP lights, Heater, fan in equipment room

  Components in equipment room wired for XP conditions
  Outside light and control panel

Control Panel Specifications:

PLC (Program Logic Controller)

  HAO switch all components  

 

Emergency stop button

 

Fault lights and reset 

 

GFI  

Inlet hose connections:

3” male camlock inlet fittings including site glass, flow meter, vacuum gauge, flow control valve)

Outlet hose connections:

3” air stack for LRP exhaust (18 ft ht.)

 

Vapors can be plumbed for off-gas treatment

 

1” male camlock water discharge

Power requirement:

230 volt, 3 phase, 100Amp service (Main fused disconnect located outside trailer)

            Contact ProAct at 231-843-2711   Fax 231-843-4081  or  ProActAdvantage@proact-usa.com

            Back