ProAct Treatment Equipment
Specification Sheet
ProAct Treatment Equipment
Specification Sheet
Dual Phase Extraction System
ProAct DPES 300 w/
Bag Filters & Carbon Adsorbers
Featuring the "ProAct Advantage"
| General Specification: | Liquid Ring Pump w/Bag Filters, Carbon Adsorbers |
|
|
300 ACFM @28 Hg |
|
|
5 GPM water treatment |
|
Trailer Size: |
8 ft wide x 16ft long x 7ft height |
|
|
4,000 pounds double axle trailer |
|
Main Equipment: |
20 Hp Oil sealed Liquid Ring Pump |
|
|
200 gallon knock out tank w/clean out port |
| 5 GPM XP 3/4 Hp Moyno pump | |
| 2-LCO8 Rosedale bag filters | |
| 2-200 pound granular activated carbon adsorbers | |
|
|
ERCO flow meter (air) |
|
|
Totalizing water flow meter |
|
|
Vacuum and pressure gauges, sample ports |
|
Trailer Specifications |
XP lights, Heater, fan in equipment room |
| Components in equipment room wired for XP conditions | |
| Outside light and control panel | |
|
Control Panel Specifications: |
HAO switch all components |
|
|
Emergency stop button |
|
|
Fault lights and reset |
|
|
GFI |
|
Inlet hose connections: |
1 male camlock 3 inlet fittings and/or 4-1well manifold including site glass, flow meter, vacuum gauge, flow control valve) |
|
Outlet hose connections: |
4 air stack for LRP exhaust (18 ft ht.) |
|
|
Vapors can be plumbed for off-gas treatment |
|
|
1 male camlock water discharge |
|
Power requirement: |
230 volt, 3 phase, 100Amp service (Main fused disconnect located outside trailer) |
Contact ProAct at 231-843-2711 Fax 231-843-4081 or ProActAdvantage@proact-usa.com