ProAct Treatment Equipment
Specification Sheet
ProAct Treatment Equipment
Specification Sheet
Thermal Catalytic Oxidizer
ProAct TCO Chloro 500a
Featuring the "ProAct Advantage"
|
General Specification: |
Thermal/Chloro-Catalytic Oxidizer |
| Propane or Natural Gas | |
|
|
500 SCFM @20”H2O |
|
|
Scrubber System |
|
Trailer Size: |
8 ft wide x 30 ft long x 9ft height |
|
|
9000 pounds double axle trailer |
|
Main Equipment: |
3 Hp XP blower |
| Flame arrestor | |
| Heat Exchanger | |
| Burner (336,000 BTU/Hr) | |
| Stainless Steel Reactor | |
| Catalyst to treat chlorinated compounds | |
|
|
Scrubber System for HCl treatment |
|
|
Circular Chart Recorder (Inlet and Outlet Temperatures) |
| Complete enclosed system | |
|
|
Vacuum and pressure gauges, sample ports |
|
Trailer Specifications |
System is mounted on back of a flat bed trailer |
|
Control Panel Specifications: |
PLC (Program Logic controller) |
|
|
On/Off Switch all components |
|
|
Emergency stop button |
| Fault lights and reset | |
|
|
Interlock connections |
|
Inlet hose connections: |
1 male camlock 6” inlet fittings (30 ft hose w/system) |
|
|
Auto dilution valve |
|
Outlet hose connections: |
8” air stack from top of enclosure (20 ft ht) |
|
Power requirement: |
240 volt, 3 phase, 100 Amp service |
Contact ProAct at 231-843-2711 Fax 231-843-4081 or ProActAdvantage@proact-usa.com