ProAct Treatment Equipment
Specification Sheet
ProAct Treatment Equipment
Specification Sheet
Thermal Catalytic Oxidizer
ProAct TCO 500
Featuring the "ProAct Advantage"
|
General Specification: |
Thermal/Catalytic Oxidizer |
|
|
Propane or Natural Gas |
|
|
500 SCFM @20”H2O |
|
Trailer Size: |
8 ft wide x 16 ft long x 9ft height |
|
|
3000 pounds double axle trailer |
|
Main Equipment: |
3 Hp XP blower |
| Flame arrestor | |
| Heat Exchanger | |
| Burner (325,000 BTU/Hr) | |
| Stainless Steel Reactor | |
|
|
Catalyst (Option) |
|
|
Circular Chart Recorder (Inlet and Outlet Temperatures) |
| Complete enclosed system | |
|
|
Vacuum and pressure gauges, sample ports |
|
Trailer Specifications |
System is mounted on back of a flat bed trailer |
|
Control Panel Specifications: |
PLC (Program Logic controller) |
|
|
On/Off Switch all components |
|
|
Emergency stop button |
| Fault lights and reset | |
|
|
Interlock connections |
|
Inlet hose connections: |
1 male camlock 6” inlet fittings (30 ft hose w/system) |
|
|
Auto dilution valve |
|
Outlet hose connections: |
8” air stack from top of enclosure (20 ft ht) |
|
Power requirement: |
230 volt, 3 phase, 60 Amp service (20 ft electrical cord) |
|
|
460 volt, 3 phase, 30 Amp service (20 ft electrical cord) |
|
|
Propane or natural gas connection |
Contact ProAct at 231-843-2711 Fax 231-843-4081 or ProActAdvantage@proact-usa.com