ProAct Treatment Equipment
Specification Sheet
Water Treatment Systems
ProAct C 70a with Submersible Pumps
Featuring the "ProAct Advantage"
|
General Specification: |
Carbon Water Treatment System w/ Submersible Pumps |
|
|
70 GPM |
|
Trailer Size: |
8 ft wide x 20 ft long x 9ft height |
|
|
10,000 pounds triple axle trailer |
|
Main Equipment: |
4-15 GPM 1/2 Hp @45 PSI water pump |
|
|
2 LCO8 Bag filters |
|
|
4-800 pound granular activated carbon filters |
|
|
Flow meter |
| Air bleeds | |
| All required plumbing | |
|
|
Pressure gauges, sample ports |
|
Trailer Specifications |
Lights, heater inside insulated trailer |
|
Control Panel Specifications: |
Pump HAO Switch |
|
|
Low pressure shut off for each submersible pump on a timer |
|
|
Interlock connections |
|
Inlet hose connections: |
4-male camlock 2” inlet fitting (10 ft hose w/system) |
|
Outlet hose connections: |
1-male camlock 2” outlet fitting (10 ft hose w/system) |
|
Power requirement: |
230 volt, 1 phase, 60 Amp service (Main fused disconnect located outside of trailer) or |
|
|
230 volt, 3 phase, 50 Amp service (Main fused disconnect located outside trailer) |
Contact ProAct at 231-843-2711 Fax 231-843-4081 or ProActAdvantage@proact-usa.com