ProAct Treatment Equipment
Specification Sheet
ProAct Treatment Equipment
Specification Sheet
Water Treatment Equipment
ProAct C 30/SVE 200
Featuring the "ProAct Advantage"
|
General Specification: |
Carbon Water Treatment System w/ SVE Treatment System |
|
|
30 GPM |
|
|
200 CFM @80” of water |
|
Trailer Size: |
8 ft wide x 20 ft long x 9ft height |
|
|
10,000 pounds triple axle trailer |
|
Main Equipment: |
4- 10 GPM ½ Hp @45 PSI water pump |
|
|
2 LCO8 Bag filters |
|
|
2-800 pound granular activated carbon filters |
|
|
Flow meter |
| Air bleeds | |
| All required plumbing | |
| Pressure gauges, sample ports | |
| 10 Hp motor with DR8BD72W Rotron regenerative blower | |
| 120 gallon Knock-out tank and gauges | |
| 4-2” well manifold with vacuum gauge, flow meters and flow control valves | |
| Vacuum and pressure and sample ports | |
|
|
1-1,000 pound vapor phase carbon adsorber (located outside of trailer) |
|
Trailer Specifications |
Lights, heater inside insulated trailer |
|
Control Panel Specifications: |
Pump HAO Switch |
|
|
Interlock connections |
|
|
4 interlock connections for shut down of pumps remotely |
|
Inlet hose connections: |
4 male camlock 2” inlet fitting (20 ft hose w/system) Air |
|
|
4 male camlock 1” inlet fitting (20 ft hose w/system) Water |
|
Outlet hose connections: |
Male camlock 4” outlet fitting (10 ft hose w/system) Air |
|
|
Male camlock 2” outlet fitting (10 ft hose w/system) Water |
|
|
10 foot air discharge stack for top of carbon adsorber |
|
Power requirement: |
230 volt, 3 phase, 100 Amp service (Main fused disconnect located outside of trailer) |
Contact ProAct at 231-843-2711 Fax 231-843-4081 or ProActAdvantage@proact-usa.com