ProAct Treatment Equipment
Specification Sheet
ProAct Treatment Equipment
Specification Sheet
Water Treatment System
ProAct AS 30
Featuring the "ProAct Advantage"
|
General Specification: |
Air Stripper |
|
|
100-160 cfm air flow |
|
|
37:1 Air to water ratio |
|
Tray Size: |
12" wide x 36" long x 10" height |
|
|
96"Maximum Height without skid |
|
Main Equipment: |
30 gpm Air Stripper |
|
|
304 Series Stainless Steel |
| Gasoline resistant neoprene material Demister is polypropylene material capable of 95% of droplets 5 microns or larger | |
| Anti bypass valve | |
| Downcomer weir square ensures uniform water distribution over trays | |
| Sieve Trays maintain 4” water height | |
| Tray alignment buttons | |
| Tray fastening | |
|
|
30 gallon collection sump |
|
|
Bleed air valve and silencer |
|
|
Air flow meter kit |
| Inlet and outlet sample ports | |
| Site tube | |
|
Trailer Specifications |
XP Lights, XP Heater inside insulated trailer |
|
Control Panel Specifications: |
All pumps HAO switch (if provided) |
|
|
High level shut off on sump pump, High/Low float switches for pump operation |
|
|
Low pressure alarm switch |
|
|
Blower pressure gauge |
|
Inlet hose connections: |
2” Flange fitting |
|
Outlet hose connections: |
3” Flange fitting |
|
|
6 3/8” O.D. Air Outlet |
|
Options: |
Water pumps, temperature probes, flow meters, enclosures , XP controls, well controls, skid platform |
|
Power requirement: |
240 volt, 1 phase, 20 Amp for Blower 2 Hp |
Contact ProAct at 231-843-2711 Fax 231-843-4081 or ProActAdvantage@proact-usa.com